Resisting temperature:ZS-711 Inorganic
color:ZS-711 Inorganic
Function:ZS-711 Inorganic
Testing Item | Performance Index | Remarks |
Color: | Grey,Black | Depending on working condition |
Solid Content | 60% | sticky |
Temperature Resistance Range | 400℃,550℃ within a short time |
Long-Term |
Calorific Value Coefficient |
Thermal Conductivity:60W/m.K Specific heat capacity:2000J /(kg·℃) |
Tested in room temperature |
Coating Strength |
Moh’s Strength 5H compression strength:≤60W/m.K bending strength:≤4Mpa bonding strength: 8Mpa |
GB/T6739-2006 GB/T1732-1993 |
Coating changes | Coating pliability: ≤4㎜ coefficient of linear expansion:18×10-6/℃ |
GB/T6742-2007 |
Coating appearance | Matte,no contraction cavity | By naked eye. |
Film forming performance : | No runs and sugs when coating thickness is over 120μm | Single use |
Drying time: |
2 hours for surface. Over 24 hours for total.the time changes along with coating thickness | 70%RH,environment temperature over 20℃,open air. |
Adhesive Force: | Grade 1. No lifing or exfoliation . |
GB/T 1721-79(89) |
Boiling water resistance test |
Brush onto sheetmetal,put into boiling water. 8 hours later,no wrinklomg,foaming,rusting.Adhesive force and oether performace don’t change. | Boiling water resistance experiment |
Mixed methylbenzene soaking test | Brush onto sheetmetal,45 days later,no softening,foaming,rusting or any other obvious changes. | In room temperature. |
Accelerated aging test | 7 days after accelerated aging test,there is no obvious change. | Cupric salt mist test at 50℃ |
Humidity resistance test | 30 days after humidity resistance test,there is no corrosion,foaming,wrinkling or loss of adhesive force. | 49±1℃,RH>95% |
Salt mist resistance test | 30 days after humidity resistance test,there is no corrosion,foaming,wrinkling or loss of adhesive force. | Continuous mist spray 5%NaCl at 35±1℃, |
Item | Temperature | duration | index | conclusion |
Sea water/brakish water | 85℃±1℃ | 24 months | No foaming,no shedding,allowing a slight discoloration | pass |
Industrial circulating water | 85℃±1℃ | 36 months | No foaming,no shedding,allowing a slight discoloration | pass |
40%NaOH、 40%KOH、 40%Na2CO3 |
Normal temperature | 36 months | No foaming,no shedding,allowing a slight discoloration | pass |
≤95℃ | 336 hours | No foaming,no shedding,allowing a slight discoloration | pass | |
25%H2SO4、 25%HCL、 25%H3PO4、 25%HAC |
Normal temperature | 24 months | No foaming,no shedding,allowing a slight discoloration | pass |
≤95℃ | 336 hours | No foaming,no shedding,allowing a slight discoloration | pass |