You are in: Home > Protective coating > for kiln lining
Product Search
Products

Product description

     After a long time high-temperature combustion , the refrectory material would easily get crispy, cracked, peeled and aged. Such problem would decrease the safety, usage and energy saving properties of the furnace. Once such problem happens, on the one hand, it takes long time to repair the furnace which would affect the normal production. On the other hand, it would cost more refractory material which would cause financial damage for the company.
     The ZS-1022 furnace lining protective coating has following properties:
High temperature resistance
Thermal-shock resistance
Strong Adhesion
Good performace in heat preservation  
Aging-resistance
Easy application


 

 

 
 

Working Principle

    It can directly sprayed on the lining surface of your furnace. All kinds of material is applicatble. Insulating brick,custables,metal,ceramic,refrectory fibre,quartz sand,carborundum,quartz glass etc. It can well protect the lining material by fornming a super dense integrated cladding like a siren suit. It can effectively extend the service time of lining material and reduce the damage ratio.

Parameters

1.Thermal Conductivity : 0.1 W/m.K
2.Temperature Resistance : ≤1800℃
3.Density :1.8g/cm3
4.The coating has a good thermal shock resistance and seismic resistance.NO cracking ,Nor Peeling.
5.Good performance in oxidation or corrosion resistance in high temperature
6.Adhesive Force :  Grade 1
7.Coefficient of Linear Expansion: 10×10-6/℃
8.Bending Strength: 1300℃,260/Mpa
9.Tensile Strength duration : 1000℃,1000H ,90/Mpa
10. Elastic Modulus : 3.7×105/Mpa

 

Package





Application:

Spray the well mixed coating directly onto the inorganic surface of furnace. Foreign matter (which has no adhesive force) is not allowed before spraying. Choose the different type of spray gun according to the required area. The coating thickness should be more than 3mm, the application temperature should be more than 15℃ in open air. Remain at least 48 hours for the coating to dry out. ZS-1022 is waterborne inorganic material.NO Volatile matter. Once skin contacted,it can be cleaned by water.

© 2016 All Rights reserved Beijing ZSWH Chemical Co., Ltd. (ZSWH)